Querying Python logs Azure Application Insight

You can send your Python logs to Azure Application Insights from anywhere and then leverage the Application Insights query and dashboard capabilities to do log analysis.  Getting access to the logs is trivial.

I wanted to plot basic internet performance information from data generated from two different machines in two different locations.  The source code is on GitHub here freemansoft/speedtest-app-insights. That project runs speedtest.net measurements and then posts them to Azure Application Insights.  It logs the raw data when the --verbose switch is set.  That verbose output is sent to Azure App Insights.


Execution pre-requisites

  1. You have an Azure login
  2. You have created an Azure Application Insights Application key https://docs.microsoft.com/en-us/azure/azure-monitor/app/create-new-resource
  3. You have pushed data to Application Insights.  I used https://github.com/freemansoft/speedtest-app-insights with the _--verbose__ switch

Video walkthrough

not yet available

Data Capture Notes

Our test program generates a single log message that is sent to Azure. We can see these messages in the Logs section as individual events. They appear as _traces_ which is the _OpenCensus_ naming convention and does not represent a true _Tracing event_. Metrics, Tracing, and Logs are all captured in the form of individual events in the Logs section of Application Insights. This is in addition to any other view on the same data.

Querying Metrics in the Application Insights Logs

  • Log in to the Azure portal 
  • Open up the Application Insights  resource that contains your data
  • Scroll down the left-hand side until you find Monitoring / Logs
  • You will get a New Query 1 panel with a pop-up panel on top of it that tries to give you useful web service queries.
  • Close the popup.  You should see something like the right side of this

Python log messages are called "traces" in the OpenCensus world which carries into here.
  1. Type traces in the query window.
  2. Delete any extra characters.  You can run more sophisticated queries later
  3. Click on the blue Run Query button
  4. You will see logging events in the results panel.

The results will show up in the lower right pane.  The entire message payload is put into the message column as a string.  The body of the log message of the first three events shown below were actually JSON strings and that is why they show up here as JSON.  You can see some text and a JSON string just below the red  square.


You can open up the full details of a message by clicking on the row.  The picture highlights
1. The logging message itself in a single field.
1. Logger metadata from the source logging framework that is stored here as custom dimensions.

References

Python Metrics and logs in Azure Applications Insights
  • https://joe.blog.freemansoft.com/2022/11/querying-python-transactions-and-spans.html
  • https://joe.blog.freemansoft.com/2021/03/querying-python-logs-azure-application.html
  • https://joe.blog.freemansoft.com/2021/03/querying-python-metrics-custom-tags-as.html
  • https://joe.blog.freemansoft.com/2021/03/displaying-python-metrics-in-azure.html
  • https://joe.blog.freemansoft.com/2021/03/monitor-internet-broadband-service-with.html
Microsoft Guides
  • https://docs.microsoft.com/en-us/azure/azure-monitor/app/opencensus-python
  • https://docs.microsoft.com/en-us/azure/azure-monitor/app/create-new-resource
  • https://github.com/census-instrumentation/opencensus-python/tree/master/contrib/opencensus-ext-azure
Python Data generator 
  • https://github.com/freemansoft/speedtest-app-insights
Created 3/2021

Comments

Post a Comment

Popular posts from this blog

Installing the RNDIS driver on Windows 11 to use USB Raspberry Pi as network attached

Image
I do a lot of my development and configuration via ssh into my Raspberry Pi Zero over the RNDIS connection. Some models of the Raspberry PIs can be configured with  gadget drivers  that let the Raspberry pi emulate different devices when plugged into computers via USB. My favorite gadget  is the network profile that makes a Raspberry Pi look like an RNDIS-attached network device.  All types of network services travel over an RNDIS device without knowing it is a USB hardware connection. A Raspberry Pi shows up as a Remote NDIS (RNDIS) device when you plug the Pi into a PC or Mac via a USB cable. The gadget  in the Windows Device Manager picture shows this RNDIS Gadget connectivity between a Windows machine and a Raspberry Pi. The Problem Windows 11 and Windows 10 no longer auto-installs the RNDIS driver that makes magic happen. Windows recognizes that the Raspberry Pi is some type of generic USB COM device. Manually running W indows Update  or  Upd...
Read more

Understanding your WSL2 RAM and swap - Changing the default 50%-25%

Image
The Windows Subsystem for Linux operates as a virtual machine that can dynamically grow the amount of RAM to a maximum set at startup time.  Microsoft sets a default maximum RAM available to 50% of the physical memory and a swap-space that is 1/4 of the maximum WSL RAM.  You can scale those numbers up or down to allocate more or less RAM to the Linux instance. The first drawing shows the default WSL memory and swap space sizing. The images below show a developer machine that is running a dev environment in WSL2 and Docker Desktop.  Docker Desktop has two of its own WSL modules that need to be accounted for.  You can see that the memory would actually be oversubscribed, 3 x 50% if every VM used its maximum memory.  The actual amount of memory used is significantly smaller allowing every piece to fit. Click to Enlarge The second drawing shows the memory allocation on my 64GB laptop. WSL Linux defaul...
Read more

Almost PaaS Document Parsing with Tika and AWS Elastic Beanstalk

Image
The Apache Tika project provides a  library capable of parsing and extracting data and meta data from over 1000 file types.  Tika is available as a single jar file that can be included inside applications or as a deployable jar file that runs Tika as a standalone service. This blog describes deploying the Tika jar as an auto-scale service in Amazon AWS Elastic Beanstalk.  I selected Elastic Beanstalk because it supports jar based deployments without any real Infrastructure configuration. Elastic Beanstalk auto-scale should take care of scaling up and down for for the number of requests you get. Tika parses documents and extracts their text completely in memory. Tika was deployed for this blog using EC2 t2.micro instances available in the AWS free tier. t2.micro VMs are 1GB which means that you are restricted in document complexity and size. You would size your instances appropriately for your largest documents.   Preconditions An AWS account. AWS ac...
Read more