Claude Hardware Buddy on the M5Stack Core2 - AWS IOT Edition

Claude Desktop's Hardware Buddy uses a published Bluetooth LE protocol, so any device that implements it can act as a status display for your Claude sessions. This implementation runs on an M5Stack Core2 (ESP32) and leans into the fun side: tap the screen to pet it, flip it face-down to put it to sleep, or shake it until it's dizzy.

The device runs the Anthropic protocol on an M5Stack Core2 to show what Claude is doing, let you approve prompts from the device, and play with an animated pet that likes attention.

It also shows open sessions, waiting prompts, token count, and battery level, and you can approve permission prompts right on the device. On battery, it dims itself when nothing is happening. The repo includes Claude Code skills that identify the board, flash the UIFlow 2.0 firmware, and install the app for you.

The Bluetooth connection isn't encrypted, so it's best used at home.

Links 

Buddy Creature Activities

The device has creature animations similar to those in the Anthropic reference implementations.

Here, the device is idle, waiting for activity.  This is an old image.  The current code hides the Approve and Deny buttons when there is no action to be taken.



Short permission requests can be handled on the device. Press the Approve or Deny Button. Longer permission requests will direct the user to approve/deny in the Claude App session window.


The creature likes attention. Rub the touchscreen and get some love animation.


Enabling the Claude Buddy

This ecosystem is aimed at developers. Anthropic Windows and Mac applications have a developer mode. The Buddy control panel is part of the developer menus that appear when Developer Mode is enabled.

Enable developer mode and menus (Mac Version)

Open the Hardware Buddy control panel


Claude Hardware Buddy App Control Panel

The control panel lets you see the connection status and statistics of any connected Hardware Buddy. Click on the Connect button to search for and pair the device.

Claude.app Buddy Control Panel waiting on a device.

The control panel shows paired devices.  Initially, you will have no paired devices so it will look like this. Then you can click on Connect



This shows a known device that is disconnected. You can see this if the IOT / M5Stack Device is turned off or out of Bluetooth range. It should auto-connect to any known device, one previously connected to.

The screen here shows the connect button because the Hardware Buddy was restarting when I took this screenshot. The paired device couldn't be found.


Waiting on claude.app to connect this Bluetooth device

The M5Stack device pauses on this screen when not tied to an active paired connection. Press Open to enable pairing or enable the connection. The Claude App can only find th edevice after this button is pressed.



Finding a device advertising as a Buddy

We clicked on the Open button on the device to put it into Waiting to connect mode. Then the Connect button in the panel.  We see this after a few seconds. Then click on the device we want to pair with. In this case, there is only one.


When the M5Stack and Claude.app are connected

The control panel should show as Connected with your device name just below the connection status. There is some two-way connection.  You can see the Core2 battery and power state and statistics in the control panel. It came from the device.


Now you are cooking.

At this point, you should start to see activity on the device screen. 

Curated References

Announcements and initial flurry of activity

Upstream Forked Repository


Revision History

  • 2026 11 12 First published


Popular posts from this blog

GitHub "Clone to Desktop" with Windows GitHub.

Installing the RNDIS driver on Windows 11 to use USB Raspberry Pi as network attached

Understanding your WSL2 RAM and swap - Changing the default 50%-25%